Fotolux MA-2 Langwei Silica Gel Moisture Absorber ( Small , Australian Plug Cable)

This Fotolux Langwei Electronic Moisture Absorber MA-2 (Silica Gel Electronic Recycle Device) is an auto moisture absorber which can be put to a container or camera bag to absorb the moisture in the environment it is situated.

When the Absorber becomes saturated with moisture, the silica gel inside the Absorber will turn PINK. During this time, the Absorber can be plugged to a power supply for approximately 2 hours to dissipate the wet silica gel and turn it back to BLUE.

Silica gel in blue colour condition means that the Absorber is dry and is ready to absorb moisture from the environment.

• Power Range: AC110V~240V, 50/60Hz
  
  
• Power Consumption for charging/drying: 16W
  
  
• Dimension: 10.8 x 7.8 x 3.2cm
  
  
• Weight: 220g 

Australian Plug Cable is included for charging/drying the unit.

Re-chargeable Moisture Absorber

This re-chargeable moisture absorber is designed to absorb moisture in a closed container or dry box. It can be simply re-charged and re-used again.

Power Consumption : 16W  AC110V-240V      Moisture Indicator : Blue = Dry ; Pink = Wet

Caution:

* This product is not water resistant.  Please keep it away from rain or wet areas.

* Do not place the Absorber in a closed container while charging as the unit will heat up.

* Only charge the Absorber in a well ventilated environment.

* Do not charge the absorber over 3 hours or overnight to avoid overheating the unit

Operation Instruction:

Step 1: Insert the power cable to the Absorber and connect the power cable to main AC power point. Red LED indicator will light up while charging.  It will take about 2-3 hours to charge and dry up the silica gels.

Step2: Once the silica gels changed from pink to blue colour, Unplug the power cable and let it rest for about 10-15 minutes to cool down.

Step 3: Place the Absorber into the dry box or container to absorb the moisture. Do not connect the Absorber to power point while using the unit. 

Step 4: Repeat step 1 & 2  to re-charge the Absorber once the silicate beads become pink colour.